Readymix concrete in Dubai

Readymix concrete by structural element

Eight mix families, from blinding under the slab to the columns above it, each batched on OPC and GGBS and adjusted to your engineer's spec.

• Gunite readymix

  Sprayed concrete for excavation faces, tank linings and curved sections, where the mix must stick to the surface and build thickness without formwork.

• Screed readymix

  A flowing mix laid over the structural slab to bring the floor to level, with fibres available where shrinkage cracking is a concern.

• Shoring readymix

  Concrete for the temporary support that holds an excavation open while the permanent basement walls and slabs are built inside it.

• Piling readymix

  Concrete for bored piles, designed to flow around the cage without vibration and resist the chlorides and sulphates found in reclaimed ground.

• Substructure readymix

  Rafts, pile caps, basement walls and ground beams: the buried elements that need a mix designed for saline groundwater, not a standard grade.

• Superstructure readymix

  Columns, beams, slabs and cores, batched to the strength class on the drawings and pumped to height with booms from 43 to 57 m.

• Blinding readymix

  A thin, low-strength layer that seals the excavated ground and gives steel fixers a clean, level surface to set out on.

• Fibre-reinforced readymix

  Fibres mixed through the concrete to control plastic shrinkage cracking on slabs and screeds exposed to wind and sun while they cure.